door panel, seat line, dashboard,
Audio alerting system
touch display , vibration actuator
touch display, speaker, buzzer
buzzer, speaker, sensors
switches, push buttons
Contitec develop high quality audio components optimized to meet your individual needs. Our wide product line of buzzers, transducers, mini speaker, speakerboxes and microphones are used across many applications e.g. automotive, industrial, telecom, building management and white goods.
|
Magnetic buzzer CA-M323220F |
Application: mobile device |
This mini magnetic transducer is one of the smalles available. The surface mount packages is as small as 3.2mm x 3.2mm and has a low profile of 2.0 mm. The sound pressure levels ranging from 65 dB up to 70 dB at 10 cm. These micro buzzers are ideal for a range of portable equipment applications.
|
Mafnetic Buzzer CA-M404020F | Magnetic Buzzer CA-M505017A |
|
|
Contitec bietet neben den üblichen 3 + 3-Anschlusssystem auch Drehkodierschalter mit 4 + 1 Anschlüssen an. Die Eingagsszuleitung befindet sich auf der einen Seite des Schalters und auf der gegenüberliegenden Seite die vier Ausgangsleitungen.Diese Zuordnung vereinfach das Leiterplattendesign. Der Schalter hat optional 4, 6, 8, 10 und 16 Stellungen. Die verwendeten Materialien sind sehr formbeständig und besonderes für den Reflowprozess geeignet. Die Gehäusevarianten SMT und THT sind erhältlich.Die Schalter sind löt- und flussmitteldicht und haben ein gutes Rastverhalten. Ferner stehen sämtliche Standardcodierungen (real, complement ) und eine Vielzahl von individuellen Bedienelementen zur Auswahl.
Copal Electronics begann 1972 als einer der ersten Hersteller mit der Produktion von Trimmerpotentiometern. Seitdem ist Nidec Copal zu einem der weltweit größten Hersteller von Cermet-Trimmern geworden. Contitec vertreibt die komplette Produktlinie von gekapselten Trimmern. Alle Bauteile stehen für Durchkontaktierung oder Oberflächenmontage zur Verfügnung.
Die Cermet SMD-Trimmerpotis kommen oft bei anspruchvollen Industrieanwendungen zum Einsatz, wo hohe Zuverlässigkeit verlangt wird.
Das Cermet-Widerstandselemente zeichnet sich durch grosse Stabilität aus. Die gekapselte Bauweise schützt den Trimmer gegen Staub und Flüssigkeiten. SMD-Trimmer von Nidec Copal Electronics sind in einer Vielzahl von Größen und Gehäuseformen verfügbar. Singleturn- und Multiturn-Trimmer stehen zur Verfügung, um die verschiedenenKundenanwendung abzudecken.
Eine neue Serie besonderes kleiner kodierte Drehschalter ist seit Kurzem verfügbar. Die Kantenlänge beträgt 7.2mm x 7.2 mm und hat eine Bauhöhe von 3.0 mm. Die Anzahl der einstellbaren Positionen sind 4, 10 und 16. Ferner stehen die standard Bedienelemente zu Verfügung. Schaltspannung ist 42VDC und Schaltstrom 100mA . Vergoldete Kontake sorgen für hohe Zuverlässigkei. Die Lebensdauer beträgt 25.000 Schaltvorgänge. Diese Drehschalter sind bestens für industrielle Anwendungen geeignet.
 |  |  |
 |  |  |  |
| SMD | Standard | J-hook | Crimped |
 | Features:
Driving noise generation for hybrid & electrical vehicles (AVAS)
• Compact size 100x100x85 mm•Frequency range 160Hz – 10 kHz•Customized sound variation optional• CAN interface•Modular concept : front panel + speaker + electronic unit + back panel• optional customer selected module configuration• Alternative "all-in-one-box" ready for plug & play•Operation temperature -40°C ~ +105°C•Automotive certified |
Often our customer has limited experience how to implement acoustic components test in their production line. Our acoustic engineers can assist you to choose right parameters and to integrate the test procedure in your QC check routine.
For further details please contact us.
| Our ambient light system is covering both "interior" and "exterior" demand. The lighting is ready as a plug&play solution for the dedicated interior/exterior application. We develop and manufacture the system including LED-lights, microcontrol unit, software and car interface link in cooperation with our partner Kepo. We are offering
|
Applications
| Car InteriorBasic Features: Single RGB light source driven by Indy 83205 / 83209 / 83211, mlx81108 and other chips, applied to different scenes and applications; The standard modular lamp head structure can support various forms of soft and hard light guides such as hard injection light guide, 3M injection type, Schott glass fiber material, etc; Product optical development based on SPEOS simulation to ensure 70% uniformity; Support music rhythm based on IVI signal output; A standard database with 256 * 256 * 256 colors; 100 brightness and 128 color control. |
 |  |  |
Applications
| Car ExteriorBasic Features: 10 * 10mm grating lens nano injection molding process; The X direction extends evenly, taking into account the aesthetic and peripheral lighting needs Light GuideLight guide cooperates with special IML process to meet the needs of exterior decoration RGB light source, non-polar color change drive, to meet more personalized color needs Support Lin communication and customize personalized function requirements; Meet the waterproof and dust-proof requirements of automotive exterior products
|
 |  |  |  |
 |  |  |
For further questions and customized solution please contact us.|
|
Ambient Lightening
|
|
Acoustic
|
|
Haptic
|
|
AVAS
|
|
| Picture | Subject | Date |
| AVAS for electric vehicle | 13.02.2020 |
 | mini Speaker for steering wheel application | 28.01.2020 |
 | Mini Drehcodierschalter der Serie "MRK" | 03.01.2020 |
 | Micro line magnetic Buzzer | 10.12.2019 |
 | Nidec COPAL Trimmerpotentiometer Cermet SMD | 10.11.2019 |
 | Drehkodierschalter 4+1 Anschlüsse | 08.10.2019 |
We offer a wide range of standard and individual solutions for logistics and Supply Chain Management. Together with our customers, we organize tailored logistics solutions such as just-in-time delivery, buffer stock, consigment stock or Kanban.
We might be the right partner for you. We have an experienced international team that will serve and support you during all stages, From the initial idea to the finished series product. We always focus on highly cost efficient, customer-oriented and top quality solutions.. We compare ourselves with the best companies in the industry. Our solutions are well proven at an international level. We are looking forward to putting your ideas into a product
Our machine parks, multiple production lines ensure for high flexibility, reliability and througly traceablity of any product. Therefore, your series production is in the best hand with us.
We are highly experienced in acoustic solutions for automotive applications, starting from simple buzzer, customized mini speaker up to piezo sounder system solutions for EV-cars. Beside all necessary authorities' approval e.g. ISO16949, ISO 9001, ISO 14001, our factories are regularly audited by Tier1/Tier2 customers and empowers us today to a solifd international automotive supplier.
At the transition stage to series production we are supported by our team of process and quality engineering as well by perfectly trained employees.
Highly specialised personnel are qualifying and testing our products. The basis of our solid quality level. We are fullfilling international automotive requirements.
Already a few weeks after desing start we are coming up with first prototype products.
Either we design a new product from the scratch or as quite often happens, we just modify a series products according to your needs.
Do you have an idea and need an intelligent solution? We are well prepared for turning your idea into a series product!
Please fill in your info.
Copal manufacturing was established in April 1967 in Japan as a specialty manufacturer of electronic components. The company’s philosophy remains unchanged: to be a supplier of high quality products while offering competitive prices. Nidec aquired Copal in 2007 and has meanwhile integrated the company. Copal supplies top quality products dedicated for demanding industrial, medical, telecom, and automotive applications. The product range covers Switches,Trimmer Potentiometers, Attenuators, Mixed Signal devices, Protectors, Current Sensors, Ratching relays, and more.
|
R&D Center , Head Quarter | Factory China |
The new technology of mechatronics lies at the heart of COPAL ELECTRONICS products. Mechatronics is a union of the long nurtured advanced technologies in precision manufacturing and electronics. Since its establishment, our company has created an extensive product line through the independent development and introduction of new technologies. For example, using contact, thick-film printing and automation technologies, COPAL ELECTRONICS mass produces trimmer potentiometers, code switches and other electronic circuit components. These products offer high performance and quality at a competitive price level.
The new technology of mechatronics lies at the heart of COPAL ELECTRONICS products. Mechatronics is a union of the long nurtured advanced technologies in precision manufacturing and electronics. Since its establishment, our company has created an extensive product line through the independent development and introduction of new technologies. For example, using contact, thick-film printing and automation technologies, COPAL ELECTRONICS mass produces trimmer potentiometers, code switches and other electronic circuit components. These products offer high performance and quality at a competitive price level.Also our production has combined diamond point cutting, optical thin film deposition and precision instrumentation to manufacture high performance reliable polygon laser scanners.
COPAL ELECTRONICS produces sophisticated pressure sensors by using silicon diaphragm etching and diffusion technologies. Thick-film printing and laser trimming technologies are also used in the production process of these pressure sensors.Supported by these technologies, COPAL ELECTRONICS products have an outstanding reputation for reliability.
Our products are widely used as key elements in electronic steering units for automation machinery, instrumentation, communication, broadcasting and factory automation
| Contitec cooperates with a number of established and state-of-the-art connector manufacturers. In many cases with more than 30 years of manufacturing experience, our suppliers are specialized in high definition digital products such as HDMI and DisplayPort connectors. Development is proceeding at the forefront of the industry, thus often creating new models for leading edge connector products.
In the following, the potential of one of our close partners is described in detail.
Strong R&D TeamMore than 90 engineers create new products every month to broaden your choices. Furthermore, we reinvest 10 percent of our annual revenue in R&D. Our general lead time for a new model (plastic and metal tooling) is 45 days. But for special requirements we can shorten this to 30 days.
High Manufacturing CapabilitiesThe factory is equipped with Switzerland-made high performance stamping machines (BRUDERER), Japan-made injection machines (SUMITOMO, FANUC), and insert-molding machines. Moreover, we are able to design tooling and equip tool machining facilities in house. With the capability of 1,300 skilled operators and 43 assembly lines, we can fulfil your volume order requirements easily.
State of the Art Industrial StandardsAll of our products are manufactured according to industry standards. Take HDMI products as an example: Our HDMI cables passed relevant tests and acquired the ATC certificate; our HDMI connector is also listed on the HDMI approved connector list, so there are no problems with compatibility. We are ISO 9001:2008- and ISO 14001:2000-certified, and all our products are RoHS compliant, meeting the REACH regulations to ensure that the products are green and safe. A Halogen-Free product is now also available. | |
|
| |
|
| |
|
High Speed Stamping |
Precision Molding |
|
Laboratory Testing |
Quality Control |
| Contitec arbeitet mit einer Reihe von etablierten, "state-of-the-art" Steckerherstellern zusammen. In vielen Fällen haben unsere Hersteller mehr als 30 Jahre Produktionserfahrung und sind spezialisiert in digitalen Produkten wie z.B. HDMI, USB3 und DisplayPort Steckern.
Im folgenden werden die Möglichkeiten eines unserer engen Partner beispielhaft im Detail beschrieben.
Starkes F&E TeamMehr als 90 Ingenieure entwickeln ständig neue Produkte. Über 10 Prozent des Jahresumsatzes wird in F&E reinvestiert. Die Standard-Vorlaufzeit für ein neues Modell (Werkzeugbau in Plastik und Metall) beträgt ca. 45 Tage.
Modernste FertigungsmöglichkeitenDie Fabrik ist bestückt mit in der Schweiz hergestellten Hochleistungs-Stanzautomaten (BRUDERER), in Japan hergestellten Spritzgießmaschinen (SUMITOMO, FANUC), sowie Einspritzgußmaschinen. Weiterhin können wir die Werkzeugausstattung und -bestückung im Hause entwicklen. Mit einer Kapazität von 1300 ausgebildeten Mitarbeitern und 43 Produktionslinien können wir leicht Ihre hochvolumigen Bestellanforderungen umsetzen.
Neueste IndustrienormenAlle unsere Produkte werden gemäß den neuesten Industrienormen hergestellt. Zum Beispiel HDMI-Produkte: Unsere HDMI-Kabel haben die relevanten Tests bestanden und das ATC-Zertifikat erhalten; unser HDMI-Stecker ist auch in der "HDMI Approved Connector List" aufgeführt; es gibt keine Kompatibilitätsprobleme. Alle Produktionsstandorte sind ISO 9001:2008- und ISO 14001:2000-zertifiziert. Unsere Produkte erfüllen RoHS und die REACH-Vorgaben.
| |
|
| |
|
| |
|
Hochgeschwindigkeits-Stanzen |
Präzisionsformen |
|
Labortests |
Qualitätskontrolle |
Based on special demanding applications we have the ability to intergrate customized test cycles in our production line. Additonally we offer as a very last step, a final component inspection just before delivery according to DIN ISO2859 / DIN ISO3951.
All tests are performed in Europe. We measure selected parameters e.g. mechanical, electrical, acoustic, optical etc. depending on customer needs. Please contact us for specific requirements.
Do you have an idea and need an intelligent solution? We are well prepared for turning your idea into a series product!
Either we design a new product from the scratch or as quite often happens, we just modify a series products according to your needs.
Already a few weeks after desing start we are coming up with first prototype products.
Highly specialised personnel are qualifying and testing our products. The basis of our solid quality level. We are fullfilling international automotive requirements.
We are highly experienced in acoustic solutions for automotive applications, starting from simple buzzer, customized mini speaker up to piezo sounder system solutions for EV-cars. Beside all necessary authorities' approval e.g. ISO16949, ISO 9001, ISO 14001, our factories are regularly audited by Tier1/Tier2 customers and empowers us today to a solifd international automotive supplier.
At the transition stage to series production we are supported by our team of process and quality engineering as well by perfectly trained employees.
Our machine parks, multiple production lines ensure for high flexibility, reliability and througly traceablity of any product. Therefore, your series production is in the best hand with us.
We offer a wide range of standard and individual solutions for logistics and Supply Chain Management. Together with our customers, we organize tailored logistics solutions such as just-in-time delivery, buffer stock, consigment stock or Kanban. We might be the right partner for you. We have an experienced international team that will serve and support you during all stages, From the initial idea to the finished series product. We always focus on highly cost efficient, customer-oriented and top...
We might be the right partner for you having an experienced international team. From the initial idea to the finished series product, we serve and support you at all stages. Our products are highly cost efficient , having best quality and are customer oriented solutions. We compare ourselves with the best companies in the industry. Our solution are well accepted on international level. We are looking forward to putting your idea into a product.
|
Our engineers provide competent and fast technical support all over Europe. Starting from product definition, application support and up to phase-out programs, we will support you. We talk to your R&D, Production, offer technical solutions and bring "added value" to your applications.
|
|
Unsere Ingenieure liefern kompetenten und schnellen technischen Support innerhalb ganz Europas. Angefangen von der Produktdefinition, dem Applikations-Support, bis zum Phase-Out-Programm, werden Sie von uns unterstützt. Wir unterhalten uns mit Ihrer F&E und Ihrer Produktion und erzeugen "added value" (Zusatznutzen) bei Ihren Applikationen.
|
European Sales Support
We have local sales forces close to your locations in Germany, Italy, and Hungary. From here we can offer personal and individualized services for all of your needs with respect to purchasing, administration services, R&D and production locations within 24h
Local sales force
Developing a new product is a complex process that requires a concerted effort, managing a project through the various stages of development. Contitec realizes this during the product definition, development and manufacturing stages. Our target is to provide the product you want to have with regard to the quality, functionality, and cost that are needed to make it a market success.
Our speaker designers use simulation software to validate their designs before committing to prototypes and production runs. The simulation tools are based on finite element analysis (FEA) applications that provide basic one-, two- and three-dimensional modeling and simulation. This pairing of knowledge, experience and simulation tools leads to products that optimally fit your application environment.
... between our designers, engineers, and manufacturing specialists allows us to consider the effects that the design will have on the manufacturing phase at a very early stage. As a result, customers benefit from a product that is designed carefully for mass production from the beginning, and they can take advantage of cost reduction, reduced risks, and a shorter time-to-market.We have worked on numerous projects and this makes it possible for you to leverage our experience in developing customer specific products.
Established in 1995, our manufacturing company is an international joint venture located in Ningbo, China. The company covers an area 16,000 square meters, combined with more than 900 employees. All acoustic products are manufactured in four factories in the Shanghai area. Our main products include Piezoelectric Ceramic, Piezoelectric Sensor, Buzzers, Speakers & Receivers, Alarms & Horns and Microphones. In 4 factories over 900 skilled employees are working and allowing us to meet high volume demands of our OEM customers.
Factory 1
Factory 2
Factory 3
Factory 4
A Sector of Engineering Technology has been set up in each different Division, to execute the Innovation and Improvements for Production Technology. As a result, we have already mastered several core technologies such as the Piezo electric element manufacturing technology, INSERT manufacturing technology, diaphragm manufacturing technology, plastic mold designing technology, equipment designing/manufacturing technology, software program design, and other fundamental technologies. All of these help us strengthen our core compentences. We possess the necessary equipment and apparatus for new product developments. Some of these are imported from South Korea, Japan and the United States. This helps us to meet the needs for all tests, measurements, evaluation and development of new products.
The Engineering Technology Group (ETG) was set up a couple of years ago to implement the innovation and improvements for the production process. With continuous efforts, we have mastered the improvement of major core technologies, like the piezo element manufacturing technology, INSERT manufacturing technology, diaphram manufacturing technology, plastic mold designing technology, production equipment designing technology. We implemented successfully software program designs for monitoring all production process steps. We possess adequate equipment and apparatus imported from South Korea, Japan and the United States.
To minimize human influences, we have fully or semi automated machines implemented for all critical production steps, thus enabling us to keep high levels of production quality.
automated soldering
autom. glue maschine
autom. membrane positioning
To minimize human influence on the production process, we execute all critical production steps like welding or product testing on fully or semi automated machines. The final product test procedure is done automatically by measuring parameters e.g. SPL, Impedance, Frq-curve etc. Only when the inspection results are "good", the automating code printing mashine EOL will mark the part number on the device. Otherwise the device will be phased out and not marked.
EOL Auto Code Machine
Final Buzzer Test (automatic)
S.P.L,Fre. , Impedance
Automotive Solutions
We are highly dedicated and experienced to offer customized acoustic solutions for automotive applications, starting from simple alarm buzzer, customized mini speaker upt to piezo sounder system solutins for new electronic vehicals. All the above tasks have strengthened our core competetence and empower us today to operate a solid automotive production. Beside all necessary authorities' approval e.g. ISO16949, ISO 9001, ISO 14001, our factories are regularly audited by Tier1/Tier2 customers.
With focus on automotive designs, our acoustic products deliver the right performance and reliability at the right cost. This is decisive for our success in the automotive component business. Today, we are diversifying our customer base and entering new automotive applications e.g. EV-cars, thus creating a dynamic growth-oriented environment.
We have established an integrity quality system and quality organization, and have set up a QC center responsible for the company's IQC, OQC, ROHS, and reliability tests. The entire company's product quality is under the center's monitor. We have also established quality management sectors in the company's various Divisions, taking charge of the IPQC, analysis of customer complaints, quality engineering, CPK, SPC quality statistics and analytics etc. In 1999, we approved the IS09001 quality system, and adopted the IS014001 environment system in 2005. In May 2007 we approved the ISO/TS16949: 2002 quality system, IATF Certificate Number: 0048630; CASC Certificate Number: 2007 A024. In accordance with the needs of customers, we also have the approved quality certification on CE, UL, E-MARK. We perform automotive level validation test standard e.g. VW80000 etc.
Clean room (Microphone-module production)
In our production, we have integrated automated data aquisition and data capturing of all relevant production processes. Each products has a barcode label an we can trace all the production parmeter at ny production steps. We are able to discover at a very early stage any parameter shifts in production, and can start immediate countermeasures to keep a constantly high production quality level. All data are stored in our MES computer system and can be used for later analyses (FMEA). We are considering to open this production related data to customer on a web access basis.
tracability scan
Data Aquisition
Parameter Capturing
| We are available: | ||
|
|
|
|
| HQ Central Europe | Sales office | Sales office |
 Germany |  Hungary |  Italy |
| Central Europe: | Eastern Europe: | Southern Europe: |
| Contitec Components GmbH Schatzbogen 33 D-81829 München | Contitec Electronics Ltd. Mr. Nemeth Liszt F. u. 10 | Contitec Electronics Ltd. Mr. Safran |
| | ||
| ® Contitec 2019 | | |
